Product introduction
Welding pipe aligner is the clamping structure of the pipeline is formed by hinges. There is a welding hole in the middle of the clamping component, which is used to expose the joint of the pipeline and facilitate the welding machine to operate through the welding hole. This design uses a clamping rod to control two clamping components to quickly align, position, and weld the pipeline. It is suitable for single person operation, simplifies maintenance steps, saves manpower and time, and improves work efficiency and welding quality.
Product advantage
Improve alignment accuracy: Welding couplings can select corresponding tools according to the required diameter of the steel pipe, quickly and accurately align the diameters at both ends, thereby ensuring welding accuracy, avoiding problems such as air and water leakage, and improving the quality of the pipe.
Save time and labor: Traditional welding methods require manual alignment of the diameter of the steel pipe. Once the alignment is found to be inaccurate, it needs to be readjusted, which not only wastes time but also consumes labor. By using a welding tool, one only needs to select the appropriate tool to quickly align the diameter of the steel pipe, greatly saving time and labor
Parameter
Weld butt A1
Specification and model: A1
Package size (CM) : 23*20*10
Weight (KG) : 2/2.4
Material: Steel
Clamping range: 25-65mm
Product weight: 2.4-2.0kg
Weld butt A2
Specification model: A2
Package size (CM):31*23*10
Weight (KG) : 3.614
Material: Steel
Clamping range: 50-150mm
Product weight: 4.0-3.6kg
Weld butt A3
Specification model: A3
Package size (CM) : 47*40*10
Weight KG) : B.E\9.8
Material: steel
Clamping range: 127-300mm
Product weight: 9.8-8.6kg
Product uses
Product introduction
Welding pipe aligner is the clamping structure of the pipeline is formed by hinges. There is a welding hole in the middle of the clamping component, which is used to expose the joint of the pipeline and facilitate the welding machine to operate through the welding hole. This design uses a clamping rod to control two clamping components to quickly align, position, and weld the pipeline. It is suitable for single person operation, simplifies maintenance steps, saves manpower and time, and improves work efficiency and welding quality.
Product advantage
Improve alignment accuracy: Welding couplings can select corresponding tools according to the required diameter of the steel pipe, quickly and accurately align the diameters at both ends, thereby ensuring welding accuracy, avoiding problems such as air and water leakage, and improving the quality of the pipe.
Save time and labor: Traditional welding methods require manual alignment of the diameter of the steel pipe. Once the alignment is found to be inaccurate, it needs to be readjusted, which not only wastes time but also consumes labor. By using a welding tool, one only needs to select the appropriate tool to quickly align the diameter of the steel pipe, greatly saving time and labor
Parameter
Weld butt A1
Specification and model: A1
Package size (CM) : 23*20*10
Weight (KG) : 2/2.4
Material: Steel
Clamping range: 25-65mm
Product weight: 2.4-2.0kg
Weld butt A2
Specification model: A2
Package size (CM):31*23*10
Weight (KG) : 3.614
Material: Steel
Clamping range: 50-150mm
Product weight: 4.0-3.6kg
Weld butt A3
Specification model: A3
Package size (CM) : 47*40*10
Weight KG) : B.E\9.8
Material: steel
Clamping range: 127-300mm
Product weight: 9.8-8.6kg
Product uses
